Compressed Air Accessories

Compressed Air Accessories

Air Compressor Accessorie

Compressed Air Accessories

Compressed Air Accessories are essential additions while working on any air piping project. These quality accessories operate properly and efficiently. We offer different type of accessories that suit the requirement of several air fitting equipments in various specifications.

All these accessories are offered as a standard part of the package while starting any project. These accessories are good in quality and perform well while operation. They are either made or sourced from reputed manufacturers and quality checks done before installations at site at our works.


The Filters are used for the removal of noxious gases, harmful contaminants like water, oil and dirt from entering the internal part of the compressed air system. The filters are the modular components that are manufactured using graded carbon steel and are appreciated for extended element life. These filters works with improved performance and allow high air flow rate.

  • Can be easily installed
  • Superior dust holding capacity
  • High air flow rate
  • Excellent filtration
  • Longer service life

Filters, Regulators & Lubricators (FRL's)
We offer Filters, Regulators and Lubricators (FRLs) are air preparation devices that keeps air supply in good condition and make tools and equipment to operate with high performance rate.


The compressed air filters are specifically designed to remove airborne solid and liquid contaminants. The filters are available in different models, including coalescing models which are able to remove oil aerosols and minute particles.


These regulators helps in providing controlled and consistent air pressure which is suitable for specific pneumatic equipment connected to the air system. These are offered for various applications where there is undesirable venting of downstream overpressure.


The pneumatic devices that provide lubrication in order to maintain good performance level with less wear and tear and longer service life are known as lubricators. These are specifically designed to provide right amount of oil needed for nearly all the applications in a pneumatic system, while delivering a constant ratio of oil to air flow.

  • Excellent performance
  • Can filter minute particles
  • Low maintenance required

Quick Release Couplings
Quick Release Couplings are the connection used while separating oil, water and gases. These couplings are highly preferred as they reduce installation time and enhance accuracy and reliability. The quick-action coupling are made of high quality stainless steel, brass or plastic and are used while installation of compressed air system.

  • Easy to install
  • Long service life

  • Industrial processes
  • Military products
  • Aerospace applications
  • Gas pipeline

Non Return Valves
The Non Return Valves are used in the pipelines and allow fluids to flow in only one direction. These valves are used for reducing water hammer and check the back flow of water to the pumps from leveling up. Manufactured in compliance with advanced valve technology, these valves offer small pressure drops which enable these to be suitable for applications with smallest opening pressures.

  • High leak-tightness
  • Long service life
  • Good strength due to stainless steel structure
  • Suitable for handling water having turbidity of 3000 ppm
  • Can sustain temperature up to 45 C
  • Excellent interchangeability of components
  • Pumps
  • Chemical plants
  • Power plants
  • Rainwater harvesting
  • Irrigation sprinklers

Ball Valves
The Ball Valves are available with spherical disc and usually work to achieve perfect shutoff when fluid flows through it. Ball valves are easy to install and require less maintenance. These are quarter turn and provide excellent on/off control. These valves can be operated manually with levers or gearboxes and can nicely be fitted onto actuators for pneumatic, electric or hydraulic applications.

  • Ball/seats float for positive shut-off
  • Flow diversion - 3-6 & 9-12 /6-9 & 12-3
  • Internally loaded blow-out proof stem
  • Low operating torque
  • Panel mounting option
  • Can be easily actuated

Custom Made Flanges and Brackets
We are involved in offering customized flanges and brackets as per the project requirements. These are used as intermediary object that connects a smaller part of any equipment to a larger part by typically projecting smaller part sideways from the larger part. These are used with pipes of different diameters ensuring easy assembling and dissembling.

  • Longer service life
  • Corrosion resistant

Recoil Hoses
The Recoil Hoses, owing to the coil memory ensure coming back to their original shape after being extended. These coils are simple to store and help in keeping work area well organized. These are available in nylon and polyurethane materials and offer excellent flexibility to be used in various work environments.

  • High on durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics
  • Hoses are pre assembled with reusable brass fittings thus reducing assembly time
  • Longer life expectancy due to kink resistant properties
  • Superior recoil memory due to elastic properties
  • Working length is approximately 80-90% of hose length
  • Temperature Range: -40°F to +125°F
  • Working Pressure: 125 PSIG @ 75°F

PU Tubes / Pneumatic Hoses
PU Tubes or Pneumatic Hoses are manufactured using graded polyurethane and is used for carrying different fluids from one location to another. These hoses are high on flexibility and helps in complete ventilation of fumes from the ducts. These hoses are temperature and pressure resistant and are capable of quick cleanup, thus can easily handle high pressure fluid under any temperature conditions.

  • Lighter weight compared to rubber hose
  • Flexible and kink resistant
  • High hydrolysis, oil and cold resistant
  • Garden hose
  • Fire hose
  • Brake hose
  • Fuel hose

Girder Clamps
The Girder Clamps are used for efficient handling of flange beam sections and plate girders. These feature tough steel construction, protection through baked enamel paint and easy adjustment, which helps in fast and easy installation. These girder clamps are available in the size range from 1 tone through to 10 tones.

  • Robust in design
  • Left-hand thread and right-hand thread screw spindle enables quick clamping and unclamping.
  • Jaw opening can adjust different beam types and flange widths.
  • Use only for vertical lifting.
  • Screw-spindle design allows positive grip.
  • Simple design gives minimum maintenance.

Capacity Girder Size
1T 75-210mm
2T 75-210mm
5T 102-270mm
5T 90-230mm
10T 90-320mm

Brass Wingback Elbows
The brass wingback elbow is used in compressed air system with push-fit-fittings. These can be installed easily with secure termination of pipe and helps in the reduction of production down time. These fittings ensure easy rearrangement and extension of system.

  • Quickly disconnected without any tool
  • Based on push-fit technology
  • Easy to alter or extend a system
  • Corrosion resistant
  • Less maintenance
  • Easy installation

Temperature Pressure
+23°C 10 BAR
+70°C 7 BAR

Drain Valves
Designed to prevent clogging, the Drain Valves are used on process vessels and reactors. These valves are perfect to be used for transferring liquid, slurries, high viscosity fluids and polymers which may coagulate at room temperature. These valves are designed with centerline poppet's through manual process or electrically actuating using graded stainless steel, titanium, aluminum or plastic in compliance with advanced valve technology.

  • Reduces oil changing time and expense
  • No more contact with hot oil
  • Easy installation
  • Commercial, military and general aviation aircraft and helicopters
  • Hydraulic reservoirs
  • Potable water reservoirs
  • Fuel sump drains
  • Engine gearbox

Working Pressure
Temperature Pressure
+23°C 10 BAR
+70°C 7 BAR

Maximum Torque Values
Size 3/8" 1/2" 3/4" 1"
Plastic threads 3.0Nm 3.0Nm 4.0Nm N/A
Metal threads N/A 4.0Nm 5.0Nm N/A