Page 124 - PRESS-FIT SYSTEMS FOR DIVERSE APPLICATIONS

3.0 TECHNICAL DATA
XPRESS TUBE MANUFACTURING

SPECIFICATIONS

MANUFACTURING SPECIFICATIONS

Product Specification Type of tubing Welding deterioration reduction Weld slag removal

100% EDDY CURRENT
EN 10312-DVGW worksheet
SS600 (AISI 316) Stainless steel TIG or laser welded tested according to Outside
GW541(2004) Table 2
SEP 1914/EN 10246-2
100% EDDY CURRENT
SS610 (AISI 316) Stainless steel EN 10312 Table 1 TIG welded tested according to N/A
BS EN 10246-2

100% EDDY CURRENT
EN 10312-DVGW worksheet
SS620 (AISI 316) Stainless steel TIG or laser welded tested according to Outside
GW541(2004) Table 2
SEP 1914/EN 10246-2
100% EDDY CURRENT
EN 10312-DVGW worksheet
SS630 (AISI 444) Stainless steel Laser welded tested according to Outside
GW541(2004) Table 2
SEP 1914/EN 10246-2
100% EDDY CURRENT
SS640 (AISI 439) Stainless steel EN 10296-2 Laser welded tested according to Outside
SEP 1914/EN 10246-2

100% EDDY CURRENT Outside flat, inside raise
SC640 Carbon steel EN 10305-3 HF welded tested according to max.0.5mm
SEP 1914/EN 10246-2

100% EDDY CURRENT Outside weld flat insight
SC645 Carbon steel EN 10305-3 HF welded tested according to raising max.0.5mm for
SEP-1925 dimensions >54mm 0.8mm

100% EDDY CURRENT or
EN 10305-3
SC660 Stainless steel Laser welded tested according to Outside
(previously DIN 2394)
SEP 1914/EN 10246-2

TRANSPORT AND STORAGE
We recommend that tube is not left exposed to the elements, and wooden blocks. Bundles should not be stacked higher than the
that end caps remain in place during storage. recommended maximum height in order to prevent tubes from
becoming oval (the maximum height should not exceed 6 bundles,
During transport and storage of XPress Sprinkler tubes and press
fittings it is important to avoid damage and soiling. The best when stacking stack in 2x2/3x3, etc.). Please ensure that carbon and
storage temperature for fittings and tubes is between 10°C and stainless tubes are stored seperately.
25°C and they should be stored in a dry area (maximum humidity
65%). The storage of tubes should be horizontal, separated by

124