Page 30 - Drinks Dispense & Pure Water - John Guest

Polypropylene Shut-Off Valve

The PP Range of shut-off valves are produced in polypropylene and fitted with EPDM
seals. Polypropylene has the advantage of being more chemically resistant than acetal.
The valves are for use with potable water. For use with other potable liquids please
refer to our Customer Services Department for guidance.
The valves are not to be used with compressed air, explosive gases, petroleum spirits
and other fuels or for heating systems.

Working Pressures and Temperatures

Water 10 Bar at 20ºC
4 Bar at 60ºC
Minimum Temperature 1ºC

For advice on the use of 1/4 turn valves see Technical Specification on page 36.
White polypropylene

for Potable Water

SPEEDFIT TO SPEEDFIT • SPEEDFIT TO FEMALE NPTF 1/4 Turn Valves. These valves have been
•
designed to allow temporary servicing of
downstream equipment and must only be used in
the fully open or fully closed position.
DO NOT USE THESE VALVES:
• In a partially open position to control flow.
• To provide a permanent termination.
PART NO. TUBE • Without tubing assembled or plugged
OD
PART NO. TUBE THREAD (or threaded connections sealed).
PPSV040808W 1/4 OD NPTF • As a tap or “faucet”.
PPSV041212W 3/8 PPSV500822W 1/4 1/4 1/4 Turn Valves are indicated by this marker ‘•’

PPMSV040606W 6mm PPSV501222W 3/8 1/4
PPMSV040808W 8mm
PPMSV041010W 10mm
PPMSV041212W 12mm

8mm also available with mounting clip
supplied unassembled PPMSV04KIT

MOUNTING CLIP

•
SPEEDFIT TO MALE NPTF

PART NO.
SVMC-06 For 6mm and 1/4” Accessories are shown
SVMC-10 For 10mm and 3/8” on page 33.
The mounting clip is designed to give a
PART NO. TUBE THREAD very firm grip. A twisting action is needed
OD NPTF to remove the valve. The clip can be used
with either shut off valve. When used with
PPSV010822W 1/4 1/4 the short handle version, valves can be
PPSV011223W 3/8 3/8 banked together.

29